The ESR study of single crystal spinel ZnCr2Se4 diluted with Sb and V

The single crystal of Sb³⁺ and V³⁺ doped zinc chromium selenide spinel ZnCr₂Se₄ were prepared by a chemical transport method and characterized by ESR spectroscopy in order to examine the effect of nonmagnetic antimony and magnetic vanadium on properties of the system. For antimony admixtures the Neel temperature is very similar to that of the parent spinel ZnCr₂Se₄ (22 K). However, upon incorporating vanadium ions, the T_N temperature decreases down to 17.5 K, determined for the maximum vanadium content (x=0.06). The temperature dependence of the ESR linewidth over paramagnetic region is interpreted by an occurrence of spin-phonon interaction. The strong broadening linewidth together with its strong temperature dependence for vanadium doped ZnCr₂Se₄ is explained by the complex paramagnetic relaxation model.     

Structural transition of Ti3SiC2 under high hydrostatic pressure: A first-principles study

We theoretically studied the phase transformation, electronic and elastic properties of Ti₃SiC₂ ceramic by using the pseudopotential plane-wave method within the density functional theory. Our results demonstrate that there exists a structural phase transition from α‐Ti₃SiC₂ to β‐Ti₃SiC₂ under pressure up to 384 GPa, and α‐Ti₃SiC₂ is the most stable phase at zero pressure. The calculated electronic band structure and density of states reveal the metallic behavior for the polymorphs of Ti₃SiC₂. The mechanical stability of α‐Ti₃SiC₂ at zero pressure is confirmed by the elastic constants, and is analyzed in terms of electronic level. By analyzing the ratio between bulk and shear moduli, we conclude that α‐Ti₃SiC₂ is brittle in nature.     

CO adsorption on oxygen-modified molybdenum surfaces

Structures of carbon monoxide layers on the oxygen-modified Mo(1 1 0) and Mo(1 1 2) surfaces have been investigated by means of density-functional (DFT) calculations. It is found that CO molecules adsorb at hollow sites on the O/Mo(1 1 0) surface and nearly atop Mo atoms on the O/Mo(1 1 2) surface. The favorable positions for adsorption are shown to be near protrusions of electron density above the Mo surface atoms. The presence of oxygen on the molybdenum surface significantly reduces the binding energy of the CO molecule with the substrate; on the oxygen-saturated Mo(1 1 0) surface, the adsorption of CO is completely blocked. The calculated local densities of states (LDOS) demonstrate that the O 2s peak for O adsorbed on Mo(1 1 0) surface is at −19 eV (with respect to the Fermi level), while for the oxygen atom of an adsorbed CO molecule the related 3σ molecular orbital gives rise to a peak at −23 eV. This difference stems from the bonding of the O atom either with Mo surface for adsorbed O or with C atom in adsorbed CO, and therefore the position of the O 2s peak in photoemission spectra can serve as a convincing argument in favor of either the presence or absence of the CO dissociation on Mo surfaces.     

Characterization, sintering and dielectric properties of nanocrystalline zinc oxide prepared by a citric acid-based combustion route

Nanosized zinc oxide has been synthesized through a novel single step solution combustion route using citric acid as fuel. The X-ray diffraction (XRD) analysis revealed that the synthesized ZnO nanopowder has the pure wurtzite structure. The phase purity of the nanopowder has been confirmed using differential thermal analysis (DTA), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The morphology and crystalline size of the as-prepared nanopowder characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the powder consisted of a mixture of nanoparticles and nanorods. The nanocrystalline ZnO could be sintered to ∼97% of the theoretical density at 1200 °C in 4 h. The dielectric constant (ε_r) and dielectric loss (ε_i) of sintered ZnO pellets at 5 MHz were 1.38 and 9×10⁻², respectively, at room temperature.     

Structural and vibrational properties of Ca2FeH6 and Sr2RuH6

The structural and vibrational properties of the isostructural compounds Ca₂FeH₆ and Sr₂RuH₆ are determined by periodic DFT calculations and compared with their previously published experimental crystal structures as well as new experimental vibrational data. The analysis of the vibrational data is extended to the whole series of alkaline-earth iron and ruthenium hydrides A₂TH₆ (A=Mg, Ca, Sr; T=Fe, Ru) in order to identify correlations between selected frequencies and the T-H bond length. The bulk moduli of Ca₂FeH₆ and Sr₂RuH₆ have also been determined within DFT. Their calculated values prove to compare well with the experimental values reported for Mg₂FeH₆ and several other compounds of this structure.     

Mesoporous TiO2-B nanowires synthesized from tetrabutyl titanate

Ultralong mesoporous TiO₂-B nanowires were synthesized via a hybrid hydrothermal-ion exchanging-thermal treatment using tetrabutyl titanate (TBOT) as a raw material. The phase transformations and porous structures of TiO₂-B nanowires were characterized and studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption-desorption measurement. Mesoporous TiO₂-B nanowires showed a length of several micrometers and diameter of about 25 nm. The porous structures of obtained TiO₂-B nanowires were demonstrated by BJH pore distribution measurement. The wirelike morphologies and porous structures of monodisperse nanowires calcined at 600 °C showed little change, which indicated that such nanowires possessed high thermal stability. The formation mechanism of TiO₂-B nanowires with mesoporous structures were also discussed based on our experimental results.     

Applications of vertically oriented TiO2 micro-pillars array on the electrode of dye-sensitized solar cell

In this research, dye-sensitized solar cells based on TiO₂ micro-pillars fabricated by inductive couple plasma etcher were investigated by analyses of X-ray diffraction (XRD), scanning electron microscopy (SEM), contact angle, ultraviolet-visible absorption spectra (UV-vis), and current-voltage characteristics. X-ray diffraction patterns show that the TiO₂ anatase phase forms while sintering at 450 °C for 30 min. The SEM images reveal that the diameter and height of TiO₂ micro-pillars are about 3 and 0.8 μm, respectively. The measurements of contact angle between TiO₂ micro-pillars and deionized water (DI water) reveal that the TiO₂ micro-pillars is super-hydrophilic while annealed at 450 °C for 30 min.The absorption spectrum of TiO₂ micro-pillars is better than TiO₂ thin film and can be widely improved in visible region with N3 dye adsorbed. The results of current-voltage (I-V) characteristics analysis reveal that dye-sensitized solar cell with TiO₂ micro-pillars electrode has better I-V characteristics and efficiency than TiO₂ film electrodes. This result may be due to the annealed TiO₂ micro-pillars applied on the electrode of dye-sensitized solar cell can increase the contact area between TiO₂ and dye, resulting in the enhancement of I-V characteristics and efficiency for dye-sensitized solar cell.     

Thermal stability and reaction properties of passivated Al/CuO nano-thermite

Thermal stability and reaction properties of Al-CuO system, a mixture of 50-200 nm aluminum nanoparticles passivated by nitrocellulose and 12 nm copper (II) oxide, were investigated with microstructure characterization, differential thermal analysis (DTA), and thermogravimetric analysis (TGA). Transmission electron microscopy observation confirmed that the passivation coating successfully hinders the oxidization. TGA revealed that the passivation shell does not influence the ignition temperature of the thermite reaction. Reaction chemistry of the nano-thermite was elucidated by heating the composite both in inert ambient and vacuum. It was found that the thermite reaction composes of three continuing steps: At 570 °C, Al is oxidized into Al₂O₃ by reacting with CuO, which forms Cu₂O and produces a significant amount of heat. Subsequently two endothermic reactions occur. Starting at 800 °C, alumina reacts with Cu₂O and forms CuAlO₂. Above this temperature CuAlO₂ will decompose and eventually produce alumina, Cu, and O₂ at 1000 °C. Since the nano-thermite reaction pathway differs greatly from bulk thermite reactions, these results are important to develop a nano-thermite platform that can be used for a novel low cost, low temperature, and copper based microjoining and advance IC packaging.     

High temperature characteristics of ZnO-based MOS-FETs with a photochemical vapor deposition SiO2 gate dielectric

The authors report the fabrication of ZnO-based metal-oxide-semiconductor field effect transistors (MOSFETs) with a high quality SiO₂ gate dielectric by photochemical vapor deposition (photo-CVD) on a sapphire substrate. Compared with ZnO-based metal-semiconductor FETs (MESFETs), it was found that the gate leakage current was decreased to more than two orders of magnitude by inserting the photo-CVD SiO₂ gate dielectric between ZnO and gate metal. Besides, it was also found that the fabricated ZnO MOSFETs can achieve normal operation of FET, even operated at 150 °C. This could be attributed to the high quality of photo-CVD SiO₂ layer. With a 2 μm gate length, the saturated I_ds and maximum transconductance (G_m) were 61.1 mA/mm and 10.2 mS/mm for ZnO-based MOSFETs measured at room temperature, while 45.7 mA/mm and 7.67 mS/mm for that measured at 150 °C, respectively.     

Preparation, characterization and photocatalytic activity of metal-loaded NaNbO3

Fe-, Ni-, Co- and Ag- loaded NaNbO₃ catalysts were prepared and their activities have been investigated in the reaction of photocatalytic hydrogen generation. Me/NaNbO₃ were synthesized by impregnation of NaNbO₃ in an aqueous solution of metal nitrates and then by calcination at the temperature of 400 °C. The crystallographic phases and optical and vibronic properties were examined by X-ray diffraction (XRD) and diffuse reflectance (DR) UV-vis and resonance Raman spectroscopic methods, respectively. Morphology and chemical composition of the produced samples were studied using a high-resolution transmission electron microscope (HR-TEM) and an energy dispersive X-Ray spectrometer (EDX) as its mode. The detailed analysis has revealed that all the investigated catalysts exhibit high crystallinity and the presence of Fe₂O₃, NiO, Co₃O₄ and Ag₂O oxides on Me/NaNbO₃ was confirmed. Finally, the influence of different metal loadings (Fe, Ni, Co and Ag) on the photocatalytic activity of NaNbO₃ for photocatalytic hydrogen generation has been investigated. Here we report that among all the Me/NaNbO₃ photocatalysts Ag-loaded NaNbO₃ exhibited higher photocatalytic efficiency for photocatalytic hydrogen generation than NaNbO₃.